when shipping a dangerous when wet material placarding is required

The black vertical stripes must be spaced so that, visually, they appear equal in width to the six white spaces between them. 49 CFR 172.101 1 CFR 1.1 the hierarchy of the document. The Pipeline and Hazardous Materials Safety Administration (PHMSA) (formerly the Research and Special Provisions Administration (RSPA)) was delegated the responsibility to write the hazardous materials regulations, which are contained in 49 CFR Parts 100-180. The DOT hazmat regulations provide classification criteria that manufacturers, shippers, and others can use to classify hazardous material. The Secretary is authorized to issue regulations to implement the requirements of 49 U.S.C. This is an automated process for Freight containers and aircraft unit load devices. border marker in the white area at each end of the inscription red. (See 49 CFR 107.606(a)(6) for exceptions and reciprocity.). New hazmat employees must receive this training within 90 days of employment. Delivery of CAO shipments is not possible in some areas of Alaska. A written report shall be submitted on DOT Form F 5800.1 for all incidents involving the transportation of hazardous materials unless excepted. formatting. Hazmat placards, on the other hand, are placed on trucks, cylinders . (This substitutes for the lack of performance tests in UN standards with regard to puncture resistance, abrasion resistance and metal fatigue). With the notation PG III appearing immediately adjacent to a TOXIC or POISON label. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc. here. A comparison of the old and new classification system is contained in 173.53. 172.519 General specifications for placards. It is important to remember that except for materials in the U. N. Recommendations, the ICAO Technical Instructions, or the IMDG Code, a material that is not a hazardous material according to this sub-chapter may not be offered for transportation or transported when its description on a shipping paper includes a hazard class or an identification number specified in 49 CFR 172.101. For the purposes of regulatory compliance within the U.S., While hazardous materials service (including carriage of PAX quantities and Class 9 in CAO quantities) is offered by contract only, UPS requires a specific additional contract for acceptance of cargo aircraft only shipments outside of Class 9. 172103, 51 FR 5971, Feb. 18, 1986; Amdt. (f) Exceptions. (ii) A compartmented tank car which contains both flammable and combustible liquids. The symbol, text, class number and inner border must be black. This requirement does not apply if the identification number for each hazardous materials contained therein is marked on the outside of the vehicle on an orange panel or white square on point placard. A freight container, unit load device, transport vehicle, or rail car which contains non-bulk packages with two or more categories of hazardous materials that require different placards specified in table 2 of paragraph (e) of this section may be placarded with a DANGEROUS placard instead of the separate placarding specified for each of the materials in table 2 of paragraph (e) of this section. Sections 172.411 through 172.450 contain the required design for each label. (2) Each material must be packaged in the manufacturer's original packaging, or a packaging of equal or greater strength and integrity. 17229, 41 FR 15996, Apr. Consumer commodities are materials that are packaged and distributed in a form intended for, or suitable for sale through retail sales. Which of the following products are considered hazmat? The purpose of the table is to assign proper shipping names, class and division, and guidance for packaging and handling requirements for hazardous materials. The letters in the words WHEN WET must be at least 25 mm (1.0 inches) high. Within the U.S. and Puerto Rico, UPS accepts non-bulk quantities of hazardous materials for transport by highway and rail, or air modes when prepared in accordance with the U.S. Department of Transportation (DOT) Hazardous Materials Regulations (HMR). A person receives an injury requiring admittance to a hospital; The general public is evacuated for one hour or more; A major transportation artery or facility is closed or shut down for one hour or more; or. You also have the option to opt-out of these cookies. Hazardous materials packages should be secured in a transport vehicle to prevent damage during transportation. The division numeral, 1.5, must measure at least 64 mm (2.5 inches) in height. This exception allows your hazardous material to be exempt from all other HMR provided: 49 CFR 173.150 is referenced for the specific hazardous material in Column 8 (A) of the Hazardous Materials Table at 49 CFR 172.101. 172.508 Placarding and affixing placards: Rail. You can learn more about the process Analytical cookies are used to understand how visitors interact with the website. information or personal data. UPS also accepts air shipments in accordance with regulations issued by International Civil Aviation Association (ICAO) and published as the Dangerous Goods Regulations (DGR) by the International Air Transport Association (IATA). P.O.P. Washington, DC 20590 . PDF DOT CHART 17 - Pipeline and Hazardous Materials Safety Administration The flammable liquid has a flash point at or above 38C (100F) and less than or equal to 60C (140F). The definition of HAZARDOUS MATERIALS includes those materials designated by the Secretary of the Department of Transportation as posing an unreasonable threat to the public and the environment. 172.202 Description of hazardous material on shipping papers . (2) The dotted line border shown on each placard is not part of the placard specification. Hazard Class 4 Dangerous When Wet Placards from Labelmaster This may satisfy the hazardous materials training requirements. However, a permanently affixed subsidiary placard meeting the specifications of this section which were in effect on October 1, 2001, (such as, a placard without the hazard class or division number displayed in the lower corner of the placard) and which was installed prior to September 30, 2001, may continue to be used as a subsidiary placard in domestic transportation by rail or highway, provided the color tolerances are maintained and are in accordance with the display requirements in this subchapter. All motor carriers, including interstate, intrastate and foreign carriers must comply with this regulation. Packages containing hazardous materials must not be banded, taped or strapped together. Public Law 103-311 amended 49 U.S.C. (b) In addition to complying with 172.519, the background color on the DANGEROUS WHEN WET placard must be blue. Person does not include the following: The word "shipper" is not specifically defined in the HMR (49 CFR Parts 170-179), due primarily to the fact that it is not possible for the Department to account for the numerous commercial arrangements that may exist under that concept, Although the word "shipper" does appear, it is used in an ordinary layman's manner rather than as a specific, technical term of art. (a) Except for size and color, the DANGEROUS WHEN WET placard must be as follows: (b) In addition to complying with 172.519, the background color on the DANGEROUS WHEN WET placard must be blue. The description of hazardous materials on a shipping paper is contained in section 172.202. For content of report and additional information, please see 171.15. Hazardous materials may not be shipped in UPS-provided packaging, such as Letters, Boxes, Paks and Tubes. DOT 3 brake fluids should be kept out of direct sunlight and exposure to moisture. Each bulk packaging, freight container, unit load device, transport vehicle, or rail car containing any quantity of hazardous materials must be placarded on each side and each end with the placards specified in Tables 1 and 2. The cookie is used to store the user consent for the cookies in the category "Analytics". Shipping Hazardous Materials (HAZMAT) Guide 2022 15, 1976, as amended by Amdt. The DOTs exceptions for combustible liquids, including those identified in 49 CFR 175.310, do not apply for any, Materials in Division 5.2 (Organic Peroxides) are not accepted in any UPS. 4 What kind of hazardous materials can be transported by HMSP? 17229A, 41 FR 40679, Sept. 20, 1976]. This term includes any department, agency, or instrumentality of the United States, a State, a political subdivision of a State, or an Indian tribe described in the first sentence of this definition. Maximum gross mass in kilograms for viscous liquids, solids, or inner packagings. Non-bulk packaging standards are based upon a number of performance tests. Delivery of hazardous materials is not possible in some areas of Hawaii. 172123, 56 FR 66264, Dec. 20, 1991; Amdt. Reuse of plastic and metal is drums based on minimum thickness requirements. DETERMINE WHETHER A MATERIAL MEETS THE DEFINITION OF A "HAZARDOUS MATERIAL". DIVISION 4.2 SPONTANEOUSLY COMBUSTIBLE MATERIAL DIVISION 4.3 DANGEROUS WHEN WET. DIVISION 4.2 SPONTANEOUSLY COMBUSTIBLE MATERIAL Except for a placard holder similar to that contained in appendix C to this part, the means used to attach a placard may not obscure any part of its surface other than the borders. Providing and affixing placards: Highway. 172.512 Freight containers and aircraft unit load devices. of a Division 1.1, 1.2, or 1.3 (explosive) material in a motor vehicle, rail car or freight container; (c) more than 1 L per package of a material extremely poisonous by inhalation; (d) a hazardous material in a bulk packaging having a capacity of 3,500 gals. Z - Meeting only packing group III tests. Washington, D.C. 20590-0001 The records required by this rule must be produced upon reasonable demand by an authorized employee of the Department of Transportation. This contact form is only for website help or website suggestions. Placards may not be displayed on any packaging, freight container, unit load device, motor vehicle or rail car unless the placard represents a hazardous material loaded into or onto the conveyance unless the shipment is in accordance with the TDG Regulation, the IMDG Code or the UN Recommendations. (3) Placarding is not required on a freight container or aircraft unit load device if it is only transported by air and is identified as containing a hazardous material in the manner provided in part 7, chapter 2, section 2.8, of the ICAO Technical Instructions (IBR, see 171.7 of this subchapter). For procedures and limitations pertaining to the display of identification numbers on placards, see 172.334. [Amdt. (See appendix C to this part. Search & Navigation As a The cookies is used to store the user consent for the cookies in the category "Necessary". The representation that a hazardous material is present in a package, container, rail car, aircraft, motor vehicle or vessel. [Amdt. (d) Recommended specifications for a placard holder are set forth in appendix C of this part. Hazardous materials may be offered in authorized single packaging, subject to the following conditions: May be offered for ground service level only in the 48 contiguous United States. The manufacture, fabrication, marking, maintenance, reconditioning, repairing or testing of a package or container which is represented, marked, certified or sold for use in the transportation of hazardous materials (49 CFR 171.1(a)), An agency or political subdivision of a State. Special agents of the Department of Transportation can not be denied reasonable access to those areas that fall within the official scope of their duties. Unit of Measure: Size: 4" x 4". All fully regulated shipments assigned to Division 6.1 (Toxic Substances - PG I or II), when offered at air or, All fully regulated shipments of Division 4.3 (Dangerous When Wet) materials, when offered at air or. Amdt. 172110, 52 FR 29528, Aug. 10, 1987; Amdt. Other uncategorized cookies are those that are being analyzed and have not been classified into a category as yet. The term offeror means any person who performs, or is responsible for performing, any of the pre-transportation functions required under the HMR for transportation of a hazardous material; tenders or makes a hazardous material available to a carrier for transportation in commerce; or both performs, or is responsible for performing, pre-transportation functions and tenders or makes a hazardous material available to a carrier for transportation. The record shall include: (1) The hazmat employee's name; (2) The most recent training completion date of the hazmat employee's training; (3) A description, copy or the location of the training materials used to meet the requirements; (4) The name and address of the person providing training; and (5) Certification that the hazmat employee has been trained and tested as required by this subpart. Person means an individual, firm, copartnership, corporation, company, association, or joint-stock association (including any trustee, receiver, assignee, or similar representative); or a government or Indian tribe (or an agency or instrumentality of any government or Indian tribe) that transports a hazardous material to further a commercial enterprise or offers a hazardous material for transportation in commerce. As an alternative, the PANTONE formula guide coated/uncoated as specified for colors in 172.407(d)(5) may be used. Refer to the, Cross-border Standard Service level to Canada is available for hazardous materials, utilizing a specially designed cross-border shipping paper for compliance with the Transport Canada requirements, including the display of the Canadian consignees address on the shipping paper. May be marked in a different location. Fully regulated hazardous materials packages in domestic U.S. service must not exceed 70 lbs. The shipper may ship hazardous materials identified in the UPS Hazardous Material Chemical Tables in compliance with all applicable DOT and/or IATA regulations, as well as the specific UPS Limitations identified within this Guide for Shipping Ground and Air Hazardous Materials. The phone number must be to someone capable of providing information on the material. Affected classes are: All fully regulated shipments assigned to P.G. (1) Each diamond (square-on-point) placard prescribed in this subpart must measure at least 250 mm (9.84 inches) on each side and must have a solid line inner border approximately 12.5 mm inside and parallel to the edge. Emergency responders may have trouble identifying the DOT emergency response telephone number. The letters in the words "WHEN WET" must be at least 25 mm (1.0 inches) high. Entries are required for number and type packaging and weight (net or gross). 1200 New Jersey Avenue SE, PHH-50 Background requirements for certain placards. Specific gravity for packaging without inner linings designed to hold liquids rounded down to the first decimal for those nonviscous liquids having a specific gravity greater than 1.2. If non-bulk, then it depends on if the hazard class is in Table 1 or 2, and the amount that is being shipped. (a) Except for size and color the CLASS 9 (miscellaneous hazardous materials) placard must be as follows: (b) In addition to conformance with 172.519, the background on the CLASS 9 placard must be white with seven black vertical stripes on the top half extending from the top of the placard to one inch above the horizontal centerline. Comments or questions about document content can not be answered by OFR staff. The only alphabetical characters allowed in this field are EXT when an extension must be included, or OPT when a caller must select an option number. The transportation of agricultural products (see 49 CFR171.8) by highway may be excepted from some or all of the provisions of the Hazardous Materials Regulations when transported in accordance with the provisions of 49 CFR 173.5. A frequent problem encountered involves the 1,001 lbs. 172.500 Applicability of placarding requirements. will bring you to those results. 2023 The representation that a hazardous material is present in a package, container, rail car, aircraft, motor vehicle or vessel. (g) Trefoil symbol. The symbol, text, class number and inner border must be white. All hazmat employees must have this training. The word TOXIC may be used in lieu of the word POISON. The symbol, text, class number and inner border must be white. The Office of the Federal Register publishes documents on behalf of Federal agencies but does not have any authority over their programs. They can either be printed on or attached to the packaging as close to the UN number and shipping name as possible. 5101 et seq. Performance tests for UN packaging, including design qualification tests and periodic retests, are included in Part 178. CDL-hazardous materials Flashcards | Quizlet (c) Each transport vehicle, portable tank, freight container or unit load device that contains a material which has a subsidiary hazard of being dangerous when wet, as defined in 173.124 of this subchapter, shall be placarded with DANGEROUS WHEN WET placards, on each side and each end, in addition to the placards . (e) Form identification. (5) Combustible liquids in non-bulk packagings. Class 1 (Explosives) Class 2.1 (Flammable Gas ) (6) The EXPLOSIVE 1.4 placard is not required for those Division 1.4 Compatibility Group S (1.4S) materials that are not required to be labeled 1.4S. FAR). For shipments of UN3171 powered by lithium batteries, UPS requires the additional marking, "Contains Lithium Batteries." Explosive substance means a substance contained in a packaging that is not contained in an article; examples include black powder and smokeless powder. (Also, see 173.133(b).). You are using an unsupported browser. (5) For transportation by transport vehicle or rail car only, an OXIDIZER placard is not required for Division 5.1 materials on a transport vehicle, rail car or freight container which also contains Division 1.5 explosives and is placarded with EXPLOSIVES 1.5 placards, as required. For the purposes of paragraphs (g)(1) through (g)(4), there is a distinction between the phrases explosive articles and explosive substances. (3) Hazardous materials prepared in accordance with 173.13 of this subchapter; (4) Hazardous materials which are packaged as small quantities under the provisions of 173.4, 173.4a, 173.4b of this subchapter; and. (1) Be securely attached or affixed thereto or placed in a holder thereon. 172.504 contains a number of notes and exceptions to these requirements. I or II), UPS does not allow these packages to be overpacked. The requirements for marking of packages are contained in 49 CFR, Subpart D, Part 172. 172123, 55 FR 52601, Dec. 21, 1990, as amended at 56 FR 66260, Dec. 20, 1991; 57 FR 45460, Oct. 1, 1992; Amdt. to the Hazardous Materials Regulations must comply with all applicable requirements of Subpart F [172.500]. In addition to UN Recommendation performance oriented tests, a vibration test for non-bulk packaging is required domestically. In addition to the provisions of 49 CFR Parts 100-180, interstate motor carriers of placarded loads must comply with the hazardous materials requirements in 49 CFR Part 397. 1,001 POUNDS OR MORE Identification number display on placards. The shipper must determine that the packaging or container is an authorized packaging, including all special requirements, and that the package has been manufactured, assembled and marked in accordance with the HMR. The text, class number, and inner border must be black. 172.504 General placarding requirements. DIVISION 1.4 MINOR EXPLOSION HAZARD Dangerous when wet - 4.3 Organic peroxide type B, liquid or solid, temperature controlled - 5.2 Materials poisonous by inhalation - 6.1; these are generally considered liquids or solids that are giving off fumes. Placards may be displayed for a hazardous material, even when not required, if the placarding otherwise conforms to the requirements of this subpart. [Amdt. 172.504 Placarding Table 2. Containers must pass or be capable of passing a series of performance tests before they are authorized for the carriage of hazardous materials. The term hazardous materials communications commonly refers to shipping papers, marking, labeling and placarding. This training must include an awareness of security risks associated with hazardous materials transportation and methods designed to enhance transportation security. When two or more Table 2 materials are contained in the same transport vehicle, the Dangerous" placard may be used instead of the specific placard required for each hazard class. developer resources. The following additional markings are required: Name of the country in which the reconditioning was performed. The background of the upper diamond must be black and the lower point of the upper diamond must be 65 mm (258 inches) above the horizontal center line. (a) Except for size and color, the POISON placard must be as follows: (b) In addition to complying with 172.519, the background on the POISON placard must be white. The symbol, text, class number and inner border must be white. DIVISION 4.2 SPONTANEOUSLY COMBUSTIBLE MATERIAL DIVISION 4.3 PRECARIOUS WHEN WET. (Applies to commodities other than Dry Ice.). DIVISION 6.2 INFECTIOUS SUBSTANCE. Package manufacturers must provide written notification to customers of any specification shortfalls or steps to be taken to conform with applicable specification. (c) Exception for less than 454 kg (1,001 pounds). (1) Each person who offers for transportation by air, and each person who loads and transports by air, a hazardous material in a freight container or aircraft unit load device having a capacity of less than 18 m3 (640 cubic feet) shall affix one placard of the type specified by paragraph (a) of this section unless the freight container or aircraft unit load device: (i) Is labeled in accordance with subpart E of this part, including 172.406(e); (ii) Contains radioactive materials requiring the Radioactive Yellow III label and is placarded with one Radioactive placard and is labeled in accordance with subpart E of this part, including 172.406(e); or. Prohibited labeling is contained in 172.401. 172151, 62 FR 1230, Jan. 8, 1997; 62 FR 39389, 39407, July 22, 1997; 66 FR 8647, Feb. 1, 2001; 66 FR 33426, June 21, 2001; 67 FR 53137, Aug. 14, 2002; 68 FR 75741, Dec. 31, 2003; 76 FR 3367, Jan. 19, 2011; 80 FR 72923, Nov. 23, 2015]. DIVISION 1.5 VERY INSENSITIVE EXPLOSIVES It is not an official legal edition of the CFR. Information that is available from the Table consists of: symbols that determine applicability, proper shipping name and shipping description, hazard class or division, identification number, packing group, label(s) required, special provisions, packaging authorizations, quantity limitations aboard aircraft, and vessel stowage requirements. Each UPS driver receiving hazardous materials must also receive a hard copy of the Shipper's Certification representing those hazardous materials shipments. Details on requirements for shipments with an origin or destination outside the U.S. are available through the Shipping Dangerous Goods Globally. Depending on the material there may be additional marking requirements. The following is a list of additional requirements: General placarding requirements are contained in 49 CFR Subpart F Part 172. Freight containers and aircraft unit load devices. If you are deaf, hard of hearing, or have a speech disability, please dial 7-1-1 to access telecommunications relay services. Part 177 for highway contains a number of general and specific requirements for loading and unloading hazardous materials in 177.834-177.854. General placarding requirements are contained in 172.504. Records may be in any format such as paper or electronic files as long as they contain the required information and are readily available. The cookie is used to store the user consent for the cookies in the category "Other. Electronic Code of Federal Regulations (e-CFR), Subtitle B - Other Regulations Relating to Transportation, CHAPTER I - PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION, SUBCHAPTER C - HAZARDOUS MATERIALS REGULATIONS, PART 172 - HAZARDOUS MATERIALS TABLE, SPECIAL PROVISIONS, HAZARDOUS MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, TRAINING REQUIREMENTS, AND SECURITY PLANS. [Amdt. Are materials of Trade considered non hazardous? This section applies to: Packages that require labeling, multi-compartmented cargo tanks, and portable tanks loaded in transport vehicles or freight containers. [Amdt. 172139, 59 FR 67490, Dec. 29, 1994]. This term includes an individual, including a self-employed individual, employed by a hazmat employer who, in the course of employment: (1) Loads, unloads, or handles hazardous materials; (2) Manufactures, tests, reconditions, or repairs, modifies, marks, or otherwise represents containers, drums, or packages as qualified for use in the transportation of hazardous materials; (3) Prepares hazardous materials for transportation; (4) Is responsible for safety of transporting hazardous materials; or (5) Operates a vehicle used to transport hazardous materials. (c) Each transport vehicle, portable tank, freight container or unit load device that contains a material which has a subsidiary hazard of being dangerous when wet, as defined in 173.124 of this subchapter, shall be placarded with DANGEROUS WHEN WET placards, on each side and each end, in addition to the placards required by 172.504. The 12.5 mm measurement is from the outside edge of the placard to the outside of the solid line forming the inner border. Navigate by entering citations or phrases Each rail car containing Division 1.1 or 1.2 (explosive) ammunition which also meets the definition of a material poisonous by inhalation (see 171.8 of this subchapter) must be placarded EXPLOSIVES 1.1 or EXPLOSIVES 1.2 and POISON GAS or POISON INHALATION HAZARD. 5110 to require retention of hazardous materials shipping papers for 1 year. "Dangerous when wet" material means a material that, by contact with water, gives off . However, a dotted or solid line outer border may be used when needed to indicate the full size of a placard that is part of a larger format or is on a background of a non-contrasting color. The shipper may accept the manufacturer's certification, specification, approval or exemption marking in determining the packaging compliance. When Shipping A Dangerous When Wet Material Placarding Is Required See DHL's guide to shipping dangerous goods to view conditions to ship, dangerous goods charges, summary of the shipper's responsibility, other important facts and information, and to contact a DHL HAZMAT expert. Displaying title 49, up to date as of 4/27/2023. Pipeline and Hazardous Materials Safety Administration, in addition to the Modal Agencies have selection criteria for shippers; "offerors", that are similar i.e. (a) Except for size and color, the POISON GAS placard must be as follows: (b) In addition to complying with 172.519, the background on the POISON GAS placard and the symbol must be white. (Levels of fine from 18 U.S.C. This UPS Guide for Shipping Ground and Air Hazardous Materials should always be used in conjunction with the most current version of the HMR in Title 49 of the Code of Federal Regulations (49 CFR), and the most current version of the IATA DGR. (c) Each placard on a transport vehicle, bulk packaging, freight container or aircraft unit load device must. Dangerous Goods of Class 4 Placards stating When Wet must be affixed in accordance with the legislation to all containers used for transporting hazardous goods.Carrying Dangerous Goods of the Class 4 When transporting wet hazardous commodities by roadway, train car, or cargo ship, it is imperative that the containers bear the appropriate contains an exception from the placarding required for ships that inclusions less 454 kg . (9) For Class 9, a CLASS 9 placard is not required for domestic transportation, including that portion of international transportation, defined in 171.8 of this subchapter, which occurs within the United States. The text and class number must be white. It does not store any personal data. Any quantity of a Division 1.1, 1.2, or 1.3 material; A quantity of a Division 1.4, 1.5, or 1.6 material requiring placarding in accordance with subpart F of this part; A large bulk quantity of Division 2.1 material; A large bulk quantity of Division 2.2 material with a subsidiary hazard of 5.1; Any quantity of a material poisonous by inhalation, as defined in 171.8 of this subchapter; A large bulk quantity of a Class 3 material meeting the criteria for Packing Group I or II; A quantity of desensitized explosives meeting the definition of Division 4.1 or Class 3 material requiring placarding in accordance with subpart F of this part; A large bulk quantity of a Division 4.2 material meeting the criteria for Packing Group I or II; A quantity of a Division 4.3 material requiring placarding in accordance with subpart F of this part; A large bulk quantity of a Division 5.1 material in Packing Groups I and II; perchlorates; or ammonium nitrate, ammonium nitrate fertilizers, or ammonium nitrate emulsions, suspensions, or gels; Any quantity of organic peroxide, Type B, liquid or solid, temperature controlled; A large bulk quantity of Division 6.1 material (for a material poisonous by inhalation see paragraph (5) above); A select agent or toxin regulated by the Centers for Disease Control and Prevention under 42 CFR part 73 or the United States Department of Agriculture under 9 CFR part 121; A quantity of uranium hexafluoride requiring placarding under 172.505(b); International Atomic Energy Agency (IAEA) Code of Conduct Category 1 and 2 materials including Highway Route Controlled quantities as defined in 49 CFR 173.403 or known radionuclides in forms listed as RAM-QC by the Nuclear Regulatory Commission; A large bulk quantity of Class 8 material meeting the criteria for Packing Group I.
Bottomless Afternoon Tea Manchester, Articles W